31 Ford Deluxe Phaeton Work!!

F

Flop

Well-known member
a floor pan came to the shop today for some work :eek:


DSC05398.jpg



check back soon as i will be doing some minor sheetmetal work on the rest of the car!!!
 
I love watching your work, you are a real "metal artiste" (or something like that). Watching the details of your work take me back to when I did those kinds of repairs-I guess my metal work got crowded out by silliness like working, raising kids, etc. etc. Might get myself a TIG rig and pick it back up. ANYWAY, keep those photos a comin!
 
good to see ya 31flamingo!


thanks greg !! plenty of work ahead!


heres the problem some rust around the access hole to the rear crossmember

DSC05416.jpg


here we are finished up

DSC05419.jpg


starting on the cowl soon!
 
Nice metal work . Ebay had the rear pan [pretty solid] $199.00 last week and did not sell. The tub i sold a solid one at $350.00 ... The kick panel i have plenty of them and i sell them for $15.00... The rear pan repro was $125.00 ..If your customer is Dave , i have spoke to him already.... Keep up the good work and save another 180A. Take allot of detail pictures... Thanks....
 
thanks kid31!!

hey peters !! Gladly helping out Dave on this fun project!!


some extra holes in the firewall!!

DSC05480.jpg



DSC05482.jpg


smoothed out

DSC05481.jpg



firewall from the back smoothed out

DSC05488.jpg


pan i fixed up sitting in place

DSC05487.jpg


a side shot

DSC05485.jpg


heres a truck of daves as of well

DSC05489.jpg
 
Last edited:
Fantastic !

Very nice to see quality work on this, perhaps most beautiful of all model A body styles !
 
great work ! just check the space between the 2 rear fenders and the rear apron across the back for fit.. And keep Dave honest with just the left side fender well.. Don't add the right side....l.o.l.Coming along great.. Also remember to put the zinc door sill on first before the body goes on the frame... Don't know why Briggs did it that way.. It suck with the nails from the bottom up...You do have A+L's telephone for all those parts?? If you don't have the zinc sill order them .Before Al died he was running short.
 
thanks everyone !

it was a pleasure to work on such a rare car!!

the fenders dont fit the opening so well so im sure there will be some work involved back there.

daves house looks like a model a store right now i think he has every part for the car scattered through out hahah .
 
Flop , the rear ,,,,,fender to fender too tight??? If your dealing with a repro steel apron ,,they are too long... gotta cut them down some and fix the end again. Also body welting goes between the apron and rear fenders,, I put black tape across the top of the apron to wood ,,not welting ..
 
peters180a/170b said:
Flop , the rear ,,,,,fender to fender too tight??? If your dealing with a repro steel apron ,,they are too long... gotta cut them down some and fix the end again. Also body welting goes between the apron and rear fenders,, I put black tape across the top of the apron to wood ,,not welting ..
Click to expand...

I know...have said this many times before...when someone goes to all the time, effort and money to reproduce something...why the heck can't they just go that extra mile and do it right the first time.

I know...that "extra mile" just might cost a few extra bucks to do it right (or more).

Pluck
 
329s said:
I know...have said this many times before...when someone goes to all the time, effort and money to reproduce something...why the heck can't they just go that extra mile and do it right the first time.

I know...that "extra mile" just might cost a few extra bucks to do it right (or more).

Pluck
Click to expand...

This past week I fit reproduction front fenders, aprons, running boards, and rear fenders on a car for someone else. They were a *****, and it took right at 20 hours to get them all fitting decent and to drill all the holes for them.
 
329's .... the repro rear apron that was made is used for the ORIGINAL fender fit... Since i helped a number of 180A owners with their cars i have found out that using repro fenders with the rear repro steel apron does not work well in some cases. The person who made the rear apron did it on his own and had a low number made. [WISH he went in having more made] They were super done since none are around !!!!!!! and original ones got the **** beat out of them for some reason.[thin metal]. He made them thicker...Anyway wanted to clear that up...Its the rear repro fenders with the problem.
 
thanks everyone . always a good time posting sheet metal pics up here .

i just bought a 31 coupe myself . shes gonna need alot of work so there will be some more sheetmetal for you guys !!


roland im in daves garage on this one . he likes the car to be in sight at all times haha !!

peters the fit to the body is not the best . he has and orig. pan we didnt try fitting it while i was there .
 
heres some of the phaeton .dave is moving right along now ! had to give hima hand shrinking a high spot today in his hood

heres the phaeton in primer

553e045f.jpg


48bba445.jpg


7eb3c944.jpg


734e865f.jpg



here is daves 24000 orig mile coupe. it has 28000 on it now .original paint on the body .fenders and aprons have been repainted. everything else as original

95a802d1.jpg


83d48a34.jpg
 
You must log in or register to reply here.
Back
Top