31 160B Floor Pan where to find them
- Thread starter wsaric
- Start date
BRENT in 10-uh-C
Well-known member
In all likelihood you will not find a good one. Therefore you will need to fabricate one yourself, -or find a metalshaper who can accurately duplicate it for you.
rogerkb1936
Well-known member
i have a nice 1930 briggs rear floor pan. will that work? i am not familiar with fordor stuff. roger
Mike V. Florida
Well-known member
Did you check berts?
SteveB31
Well-known member
Give us a call. i think we have one or two. They have some rust in the pan under the front seat, but we have a new pan that can be welded in there to repair that.
The Briggs (1928-1930) and Murray (1929-1930) floor pans will NOT work on a 160B, since the 160B has one giant floorpan that runs from the front of the front seat clear back to the very back of the body. The 1928-1930 wood bodied 4 door sedans have a pan under the front seat, another pan behind the front seat, and yet another under the back seat.
Steve Becker
Berts Model A Center
The Briggs (1928-1930) and Murray (1929-1930) floor pans will NOT work on a 160B, since the 160B has one giant floorpan that runs from the front of the front seat clear back to the very back of the body. The 1928-1930 wood bodied 4 door sedans have a pan under the front seat, another pan behind the front seat, and yet another under the back seat.
Steve Becker
Berts Model A Center
somethingspecial
Member
What location are you at, state or country ? Once winter breaks here in Michigan if you can wait I can get u dimensions to make one, yes it is one piece from front to back.