30 Tudor headliner.

[Tacoma Bob]

So my winter project is reupholstering our 30 Tudor and adding new glass. This is NOT a kit. I'm doing my own cut and sew. The headliner was very,very old and may have been original to the car. I carefully removed it only to find a PO had wrapped the bows with electrical tape many years ago. What I'm looking for is which bows from back to front were used to tack the listers (sleeves) to. I just want to make sure. TIA

 

[Big hammer]

Each bow including the metal bow, at least on my L31 tudor, the metal bow had evenly spaced holes originally. I started installing at no.3 and then work to the front and then to the back. A total of 5 bows. Mine was a kit, if you need some written instructions, pm me here and I will dig them up.

 

[davehc]

Dontknow if this will apply to yours , but I put a headliner in my 30 Town Sedan this Fall . I bought just the headliner , and before I ordered it they wanted to know what dim.'s were between the bows , for the tacking tabs . My headliner was long gone when I got the car , so after cleaning the bows good , I found which ones had been used for the tacking on the old panels by finding the ones that had the tack holes , and went from there with my dim's. I was really surprised how well it looked after I got it in also .

 

[BILL WILLIAMSON]

Vermin had Iron-On Tacking Strips & they were falling away from the headliner. I don't know WHOSE kit it was???? Be sure they're SEWN in!
Bill Disappointed