30' stainless radiator shell

Hi Bob,

We have mounted a couple of buffing pads side by side on our bench style grinder, to give as wide a surface as possible, then with the wheel spinning apply just a bit of jewelers rouge polishing compound. Don't use too much pressure on the piece.
 
Depending on the scratches in the stainless you may have to use coarser compound than jeweler's rouge. On that roadster stainless I used emery compound (black) on a spiral sewn cotton buff followed up by a white compound recommended for stainless.
If you haven't done this before I recommend you read an article on the technique and safety precautions.
 
Back
Top