clocey
Senior Member
Can anyone help me find a source for the floor pan that is under the front seat of a 30 Murray Fordor? I have dug through the major catalogs and ordered a few wrong parts and I can not find anyone who has one available. I would like to buy one but I think I have enough left of my original one to bring it by a local sheet metal shop to see if they can copy it
The rough dimensions are 33 3/4" wide at the rear and 31 1/4" wide at the front. It is 12 1/4" front to back and 1 1/4" deep. There is some additional metal on the sides and back to allow the floor pan to "rest" on the wood.
Any help would be appreciated
The rough dimensions are 33 3/4" wide at the rear and 31 1/4" wide at the front. It is 12 1/4" front to back and 1 1/4" deep. There is some additional metal on the sides and back to allow the floor pan to "rest" on the wood.
Any help would be appreciated
