29 Tudor Parts for Pattern

R

Ron Kansas

Member
I placed an ad in the "Parts Wanted" secion and bought one of the parts I need, but other than a London Scammer, got no other responses, so am trying a different approach. I am restoring a '29 Tudor, some of the parts were missing. I would be happy to buy the parts outright, or I would also be willing to borrow/rent parts from someone who is in the restoration process on a Tudor. I would pay a deposit, shipping both ways, use the parts for a pattern to make my parts in my shop and return them within a week.

The parts I need to make include:
1. The two metal triangular shaped corner brackets that fasten to the wooden piece above the windshield and attach to the side rails.
2. The two metal triangular pieces that fasten to the joint between the rear body panel and the two side quarter panels. They have a piece or wire attached that the rear seat back cushion hooks on to.
3. The two brackets that sit on the floor pan behind the rear seat frame and extend up the two inner fender panels. The go inside the two large holes in each inner fender panel and the rear fender mount bolts screw into this bracket.
4. The two upper metal brackets that fasten to the wooden uprights on either side of the rear window that rear seat cushion back hooks to at the top of the springs.

Thanks for any input, ideas or help you may provide.
Ron, Kansas ron@eyres.com
 
I would get in touch with Bert's in Colorado. The sell new parts BUT also have a very good inventory of used original parts. I recently restored a '30 Tudor and was missing some interior body pieces that were not being reproduced. They had good used ones at a fair price. They are also very knowledgable.

Just a thought.

Chris
 
You must log in or register to reply here.
Back
Top