56 hotrodder
Junior Member
Am reassembling my 29 CCPU after having it apart for 45 or so years. Can't quite remember all the details!!!! The cab is mounted , correctly I believe, but when I bolt in the pickup bed there doesnt seem to be any ( enough) clearance between the headboard and the cab. I 'm thinking there should be 1" or so and there is 1/4 " at best. All six bolts seem to fit their holes ok, but there's interference with the running board rear and the front of the rear fender. Any Ideas???? I go to bed early so I might not respond to answers until tomorrow evening. Thanks Rick