29 cc pu door glass

N

nick c

Senior Member
Could someone please explain to me the correct way to install door glass in my door. I dont believe it will go through the hole in the bottom, so it must go in the top. I bought the expensive felt channel kit from Mikes. I need to know the proper procedure to install the felt channel and the glass.
thanks nick
 
The trim, around window on the inside of the door, slides up and off as a unit. Put the fluid to it as sometimes they are rusted on - tap lightly with a mallet and block of soft wood. You then should have the room that you need.
 
After you remove the frame with rthe glass 3/4 of the way up the glass and the felt tracks will be able to be tilted in enough so the glass slides up and out.
 
At the top of the door where the foam rubber gets glued on, there is no metal in the corners to glue to, is there supposed to be a piece of channel that goes across and covers the open corners?
 
You must log in or register to reply here.
Back
Top