21 stud LB crankcase venting

1933bike1937

New member
Does anyone know if there is any opening to draw fumes out of the crankcase between the top of the draft tube and the oil pan vent on a 21 stud LB? When I look down the draft tube it opens up into a cavity and I can't tell when it goes.
If it just draws from the valve galley I want to block off the tube and run a M.E.Wagner adjustable PCV valve. Thanks
 
A pcv will draw air from the rear slinger seal , remember there is no rear seal , so you will be sucking in disc material as it wears , plus road debris.
 
At low speeds, probably better to simply entrain crankcase vapors or some blowby into air filter housing through a large diameter hose or tubing from fuel pump stand using a Chrysler style oil cap. Has built-in flame arrestor mesh for carb hiccups.



566034
 

Attachments

  • oilcap.jpg
    oilcap.jpg
    9.4 KB · Views: 72
Back
Top