TexasSpeed
Senior Member
- City
- Amarillo
- State
- TX
- Price
- $20
Shipping is at your cost.
1963 Ford Fairlane Gauge Cluster: $20
Looks pretty good.. Could use some cleaning.
Thank you!
-Matt
Here is a list of what parts I would consider in trading for:
Parts must be pre-1959
- Early Chevy 265-283 stuff such as..
- Distributors: Spalding, Roto-Faze, Vertex, Joe Hunt, Mallory, etc..
- Aftermarket valve covers: Weiand, Offy, Hildebrandt, etc..
- Finned goodies: valve covers, timing covers, oil pans, etc..
- Intake stuff: matching carburetor scoops, Holley 94s, Stromberg 97s, etc..
- Exhaust stuff: headers, black widow manifolds, 265 manifolds, etc..
- Tachometers: Especially SW but open to any pre-1959
- Aftermarket flywheels
- Chevy-to-LaSalle transmission adapter
- Side-Shift LaSalle transmissions
- Hurst or KingShift shifters for LaSalle
- 4x2 fuel block
- Early Ford top-loader transmission cases (F1 or '39)
- '39 Ford top-loader shifter stick
- Zephyr gears for the top-loader
- Quick-Change rear axle stuff
- Headlights: BLCs, Guides, etc..
- Early Ford headlight bar
- '32 Ford grille or shell
- '32 or '33-'34 Ford cowl vent
- Hubcaps for '40-'48 Ford steel wheels
- Steering wheels.. Strongly considering a '40 Ford wheel but open to others (pre-1959).
- Pie-crust slicks
- Wide 5-spoke magnesium wheels
Generally, I'm looking for late '50's speed shop goodies that I can put on my A. I'm running a '57 283 with a '39 Ford transmission and a closed drive and aiming for a 1959-era hot rod.
1963 Ford Fairlane Gauge Cluster: $20
Looks pretty good.. Could use some cleaning.
Thank you!
-Matt
Here is a list of what parts I would consider in trading for:
Parts must be pre-1959
- Early Chevy 265-283 stuff such as..
- Distributors: Spalding, Roto-Faze, Vertex, Joe Hunt, Mallory, etc..
- Aftermarket valve covers: Weiand, Offy, Hildebrandt, etc..
- Finned goodies: valve covers, timing covers, oil pans, etc..
- Intake stuff: matching carburetor scoops, Holley 94s, Stromberg 97s, etc..
- Exhaust stuff: headers, black widow manifolds, 265 manifolds, etc..
- Tachometers: Especially SW but open to any pre-1959
- Aftermarket flywheels
- Chevy-to-LaSalle transmission adapter
- Side-Shift LaSalle transmissions
- Hurst or KingShift shifters for LaSalle
- 4x2 fuel block
- Early Ford top-loader transmission cases (F1 or '39)
- '39 Ford top-loader shifter stick
- Zephyr gears for the top-loader
- Quick-Change rear axle stuff
- Headlights: BLCs, Guides, etc..
- Early Ford headlight bar
- '32 Ford grille or shell
- '32 or '33-'34 Ford cowl vent
- Hubcaps for '40-'48 Ford steel wheels
- Steering wheels.. Strongly considering a '40 Ford wheel but open to others (pre-1959).
- Pie-crust slicks
- Wide 5-spoke magnesium wheels
Generally, I'm looking for late '50's speed shop goodies that I can put on my A. I'm running a '57 283 with a '39 Ford transmission and a closed drive and aiming for a 1959-era hot rod.
Last edited: