1957 ranchero

whisper38

whisper38

Junior Member
City
marion
State
nc
Looking for ranchero script,also other chrome exterior molding,left side window vent complete.if you have any please send me a parts list of what you have.Not looking for new stuff unless its cheap.
 
Good luck finding nice ones, they are the only two pieces that were chrome plated the rest of the bed trim is stainless.
 
Also in need of the inner wheelwell trim pieces,I will pay a fair price for the pair.I'll even take a paper template of them,so I can make a set.
 

Attachments

  • well.jpg
    well.jpg
    31.8 KB · Views: 13
Last edited:
If your still needing the wheel well trim pieces I have a pair, the first few inches of the trim that face the cab are badly rusted but are still intact complete with the screw holes. $35 for the pair plus shipping.
 
cb
Thanks for replying,I will have to hold off for now,the car is in the shop either to get a new rebuilt 302 or have the 292 rebuilt,then its going up for sale.
 
A small percentage of the ranchero upper bed rail corners are stainless, they do exist. The story goes that it was hard to stamp them, so many were produced with steel, then plated. I had two plated for $75 Mark
 
the upper are a problem,I'm going to have a friend of mine chrome powder coat them,Then once the new engine goes in .Its going to put up for sale,its been a money pit for me.If I can get it sold I'll get or build a custom 1937 ford truck.Its just been one thing after another.
 
Frankenstein57 said:
So you are thinking the 37 will be a bargain build?
Click to expand...

I didn't say that,new chassic new body new frame,new motor,everything will be new from the ground up.I've already put $16000.00 in the ranchero,and hope to at least break even on it.its getting rebuilt 302 and rebuilt transmission,new 4 barrel and intake ,new disc brakes on the front,new wheels and tires,its been a interesting trip on it,but need to move on to something else.
 
You must log in or register to reply here.
Back
Top