1956 Thunderbird

toms32

Well-known member
I have an issue that a friend is going through with his 1956 T Bird. As you know that came with a continential kit. There is a lever on the bottom right to move the tire back and forth. He is moving the tire in the proper position but when he drives it the tire some times falls back in the open position. Is there a part that is not working to cause this ??? Any help or suggestions appreciated. Tom
 
I have an issue that a friend is going through with his 1956 T Bird. As you know that came with a continential kit. There is a lever on the bottom right to move the tire back and forth. He is moving the tire in the proper position but when he drives it the tire some times falls back in the open position. Is there a part that is not working to cause this ??? Any help or suggestions appreciated. Tom

Look @ dia.

Make sure the LATCH ASSY (1386) is fully functional, especially (16921) spring.
 

Attachments

  • 1956 BIRD SPARE WHEEL CARRIER _2 - ILL_crop.jpg
    1956 BIRD SPARE WHEEL CARRIER _2 - ILL_crop.jpg
    68.5 KB · Views: 9
Definitely a latch issue. When I push my coni back into position, there's a definite loud clunk!! It latches hard and has never unlatched during a drive.
 
The cone headed pin is adjustable. It may not be engaging all the way Also check the mechanism that the pin engages into making sure it is working ok.
 
Back
Top