1956 T Bird Brake Issue

T

toms32

Well-known member
I have a 1956 T- Bird and would like to change over original master cylinder to a dual unit. I already have installed disc brakes on the front and have original drums on the rear. I have been told that an early seventies non power type mustang will bolt up and will work but I need the part number and year. Also part number for the proportioning valve. Does someone have this current setup that can give me some numbers and possibly a photo or two of their setup. I know a couple of suppliers sell complete kits but they will not sell individual components from those kits. Thanks
 
I just looked up a master on Rock Auto, for a '73 Mustang, Cardone 131378. This has the lines on the outside, lines on the inside, look at a '73 Galaxie master.

I'm using a Speedway 91031420 Ford master on my '59 Ford. Also a CPP Brakes proportioning valve, APV-DB from Summit which was $69.

I had to make a few lines up but it all went together well.
 
You must log in or register to reply here.
Back
Top