1954 Customline wheel cylinders.

[Rudolph]

Hello, I am looking for some 1 1/8" wheel cylinders for some 54 custom line front brakes they are 10' x 2 1/4 front car brakes.


I understand thees wheel cylinders fit a wide range of cars but I just carn't find the part number,

 

[Rudolph]

Dose anyone know the part number or the cross over number?

 

[toby]

Dorman or Raybestos from Rockauto.com
W18290 left front
W18291 right front

 

[JeffB2]

While you are at it check this out: http://www.jalopyjournal.com/forum/threads/self-adjusting-brakes-for-a-54.899224/

 

[Rudolph]

Dorman or Raybestos from Rockauto.com
W18290 left front
W18291 right front

Cool thank you. I found some other part numbers using that part number you gave me, I hope I can get them here in nz as they seem to fit GM and Chrysler to

 

[Rudolph]

While you are at it check this out: http://www.jalopyjournal.com/forum/threads/self-adjusting-brakes-for-a-54.899224/

I just have the front brakes on a 1927 T

 

[Rudolph]

I just found they are the same as Mustang rear wheel cylinders and got the part number, I think the part shop has them.

 

[mobileparts]

Just came across your thread --- they are NOT the same as any Rear -- and they are NOT the same as any G M car.....
They fit 1949 - 1956 Ford and Mercury Fronts only.....

I have them Brand New -- Inexpensive -- and have
N.O.S. ++ asbestos ++ Brake Shoes for that application, also
(yes -- 10" x 12 1/4" Fronts -- 10" x 1 3/4" Rears, if you have that rear end).....

If you didn't get them yet -- you're in luck... can fix you up!!!!!
You can e-mail me also @ mobileparts@yahoo.com

 

[Grumpy Rick]

I bought new wheel cylinders for my '55 customline from Auto Zone. Ten years ago they had them in stock.

Rick