- City
- Nicktown
- State
- Pa.
- Price
- 13500.00
For Sale 1951 Merc.Conv. Prodject. The hard part is done. I put the body on an 1980 caddy frame, using the entire floor pan and some of the fire wall. Car needs finish body work. The outer door bottoms have been reskinned The top of the rear upper quarters where the lower quarters bolt to had to be patched and need finish body work.The car comes with a very nice pr of front fenders that are already frenched.A nice rust free lovered hood and a rust free deck lid. One new old stock rear quarter and a repaired lower quarter for the otherside.There is a front lower grille pan which has part of the bottom edge removed, a new old stock lower rear pan below the trunk lid, also front and rear bumpers. The Car is chopped with working top irons. but i didnt cut the rear quarter windows yet. The windshield has been cut 3 inches. There are no seats except for a rear springs only for the conv. back rest which could be repaired. I have a rear coupe seat that could be cut down to fit I have a set of conv. inside rear pans that will need some work on the bottom.I have all the correct conv. stainless includeing the rear boot snap stainless, also a nice chrome dash insert. Also available a 472 cubic in caddy engine that ran when i pulled it. The 51 merc conv. is considered a rare car due to the low production numbers and a low souvier, will make a neat ride. For questions call Dave 814-659-1000
Attachments
Last edited: