1951 Ford 351 Engine Installation

[garysfords]

I'm installing a 351 Windsor in my 51 Ford car and a C4 transmission. I installed an IFS Mustang II type suspension with the rack and pinion steering and a new cross member kit.
I would like some pictures of an installation to aid me. I did a test fit today and it looks like I won't be able to use the front sump oil pan. Before I buy a rear sump pan I would like to hear from someone that has done this installation.
Please reply via private email.

 

[Milt/Las Vegas]

Garysfords,I haven't done your exact installation,but I'm sure you'll need a rear sump pan.I like the 70s econoline pans best,but you can use pans from the 80s pickups and vans with the dipstick going into the side of the pan(the drain plug is on the bottom so you'll want to move the drain plug to the side on an 80s pan).Be sure you get the pickup tube with the main bearing bolt and the dipstick.If you have a Fatman crossmember that's moved up 2 inches on the frame the crossmember will have to be notched.