If you have a tester, see if the coil is getting juice to it. It will be the small wire that Does Not go to the side of the distributor. If it has power then go to next step....Pull the middle wire off the distributor cap. It comes from the coil. With ignition on, have someone crank the starter button while you hold the wire you pulled out about 1/4" or less from something metal on the block like a bolt. You might want to hold it with some insulated pliers jic it jolts you a bit. 6 or 12v won't harm you though. The spark should jump across that 1/8-1/4" gap and be sorta bright and blue. Better yet, search youtube for 'testing ignition or testing for spark. This will help. I realize I will be typing with one finger all afternoon at my rate. Best of luck, Gary