1940 Ford Headlight Switch

T

tweetiebirdcenter

Junior Member
So I replaced my headlight switch on my 40' coupe and I installed the knob now it is upside down. Instead of an L for lights now I have a 7 which way do I have to turn the knob so it is correct?
 
The knob on the switch will only work in one position. You need to turn the switch 180 degrees on the back side of the dash. Then it will be an L. Good luck
 
I have one of those "710" filler caps on the hemi in my racecar. I tell people that it's the horsepower rating of the engine.

You'd be surprised at how many people believe it.:D
 
Ken hash said:
The knob on the switch will only work in one position. You need to turn the switch 180 degrees on the back side of the dash. Then it will be an L. Good luck
Click to expand...
I had this problem with a new light switch knob with an upside-down L. I was not able to just rotate the switch 180 degrees to solve the problem. This was back 2016 so I can't remember why not....perhaps the original wires would not reach if rotated?

I contacted the vendor of the repro dash knob kit, Joe's Antique Auto Parts. Joe said it wasn't first time he heard of this problem. Manufacturing error....knob placed on shaft upside-down. After a little time he located and sent a replacement knob, this one with the L in the correct orientation.
 
I had one like that; just CAREFULLY heated the metal shaft to the point that I could rotate the plastic knob 180. Let it cool and all is well...
 
You must log in or register to reply here.
Back
Top