1940 dashboard

Ken hash

Member
30482E00-12EC-4BD3-A0BE-C27E758656D5.jpg This is my attempt to show a picture of the dash board on our coupe.
 
I tend to agree in that Gregorie got it right the first time.
 

Attachments

  • DSCN2269.jpg
    DSCN2269.jpg
    67.2 KB · Views: 291
Thanks, the process is two colors of paint then clear. I used water base ppg. The first color is very light tan. Let it dry then spray a coat of dark walnut brown over the tan. While it is wet, lay a plastic shopping bag directly on the wet paint, then lift it off. Repeat the plastic bag application until you like it. I started with a sample part. With water base paint you can clean off the dark paint before it dries and try again.
 
What are your plans for the window garnish moldings, the same grain or a contrasting color?

Sounds like a good graining technique.
 
Last edited:
Here are some photos of the garnish molding
 

Attachments

  • 496D264B-7D2D-4831-80C5-7F00F04EFA95.jpg
    496D264B-7D2D-4831-80C5-7F00F04EFA95.jpg
    54.9 KB · Views: 92
  • 91359011-E09F-468B-AA4A-161952B1A8D0.jpg
    91359011-E09F-468B-AA4A-161952B1A8D0.jpg
    52.5 KB · Views: 69
When someone restored my convertible in the '70's they painted the dash woodgrain. It reminds me of an old console radio.
 

Attachments

  • 20190321_204507.jpg
    20190321_204507.jpg
    76 KB · Views: 62
Kube: Were they also available for both sides on a standard as mine has both.

Ya know, that was something I could find no documentation on while doing my research.
While common sense might suggest they were optional, if you're seeking points on a judged concourse, I'd suggest you do not install them.
 
Back
Top