1938 Tudor standard

[fordor]

Looking for someone I can converse with who owns a 38 Tudor stock or close to it. I have several questions on putting this car back together and need some answers that I don't find in manuals. Would really appreciate it.

Bob L.

 

[JSeery]

I might be able to help.

 

[JM 35 Sedan]

Ask some of your questions here on this post. Collectively, we can usually answer most questions asked here.

 

[Snouts out]

I have a bone stock,early 21 stud 38 Tudor standard! What do you want to know?

 

[fordor]

I need to know how the e brake cable is routed into the driver's area? If I could see a pic it would be great.

Thanks,
Bob

 

[Snouts out]

It enters the cabin to the left & above the speedometer cable entry. I'll try to get some photos!

 

[fordor]

Thanks, that would be great.

 

[38 Hump]

I too may be able to help. 8ba, dual 94's, T-5, open drive line conversion, '49 rear end, 3.25.

 

[TonyM]

Here is what my 1937 Fordor brake cable routing looks like.

The car, very similar to yours, is original stock configuration.

The ridge in the metal piece at the top of the toe board allows the cable to pass.

Hope these photos help you.

 

[fordlovr]

This does'nt help any, but they are ''Still Out There'', although this is down here in NZ. Been in this shed for many year's and now being given a bit of a going over.

 

[fordor]

Thanks for the pictures Tony M. I see now that I'm missing the two metal brackets for the toe board. I going to assume that the toe board has an indentation that allows the cable to pass thru between the toe board and the gasket?

 

[TonyM]

Yes, the metal strip at the top of the wooden piece has a curved area allows the cable to pass.
It can be seen in this photo.

 

[fordor]

Thanks, Tony M. On the hunt for those pieces. If anyone knows or have's these pieces and willing to sell them let me know.

Bob L.

 

[swoopNZ]

Try Dave Pipp.
He's a Ford Barner.

Chris.NZ.
New Zealand.

 

[fordor]

Can't find him on the members list.

 

[swoopNZ]

Dave Pipp

cpipp01@aol.com

He specialises in parts like that.
Regards,
Chris.NZ.

 

[fordor]

Thanks, I sent him a email.