1938 model A powered Sears tractor

Chuck Sea/Tac

Well-known member
It was called the economy,listed for $495. Had a modelA engine, rear end , automotive? 3speed ****** and two wheel mechanical brakes. 500 made in 38/39. If you have the Napa tractor calendar , it's this months photo. Pretty cool!
 
we want one! they don't seem to come up for sale often......

I have been looking for a Thieman, a Montgomery Wards or Economy tractor for several years that is Model-A powered. Like Chris has said, they are near impossible to find. A couple of years ago I attended a tractor show just east of Rochester, MN and saw this all original Thieman that I would have "hawked the farm" for to have been able to take it home with me!!


282589_1989569176640_4471796_n.jpg


282021_1989565616551_2814848_n.jpg


282515_1989571576700_1584059_n.jpg


284563_1989568176615_1760373_n.jpg


269447_1989567256592_6142313_n.jpg


269857_1989569736654_6565331_n.jpg




BTW, notice the wagon that this tractor is pulling. Look closely at its running gear!! :cool:



.
 
The engine I currenly have on the engine stand was removed from a home made tractor and used a TT Ruxtell rear end. It was quite the contraption. I wish I would have taken pic's of it before I parted it out 15 years ago. It was still in decent running condition. Rod
 
Here's a Sears Model A powered tractor that I saw at the Alaska State Fair a couple of years ago:
 

Attachments

  • DSC_0721.jpg
    DSC_0721.jpg
    76.5 KB · Views: 378
  • DSC_0722.jpg
    DSC_0722.jpg
    50.8 KB · Views: 326
My current project (before and during), Shaw "Tractorized Ford" made out of a '25 T:
 

Attachments

  • IMG00027-20121006-1704.jpg
    IMG00027-20121006-1704.jpg
    117.5 KB · Views: 220
  • IMG00393-20130708-1233.jpg
    IMG00393-20130708-1233.jpg
    61.2 KB · Views: 207
There was a beauty at Grand Mound, IA's steam and thresherie this weekend.
 

Attachments

  • Thieman 3.jpg
    Thieman 3.jpg
    110.1 KB · Views: 201
They are not really all that rare. Typically they were found in areas where row crops were farmed. They did not make a standard or wheatland version. I've seen about a half dozen sell here in PA. 30 years ago there were still some out "in the rough" Most now are in collections, but still come up for sale from time to time.
 
The introduction of the Ford 9N in 1939 would have thrown a wrench into the cog for most smaller tractors with a price of only $585.00. With the Ferguson system 3-point hitch and a PTO, it would have been hard to beat. The Ferguson hydraulic 3-point hitch that Ford developed to actually work well, really revolutionized the farm implement capability of tractors in general. Draw bar only tractor designs started to fade away after the advent of the 3-point.
 
Last edited:
Back
Top