1937 pickup lower radiator pan

[v8fordman]

Does anyone have a picture of how or where the lower radiator pan attaches at the rear? I have two holes in the pan, but no place for attachment to the frame. Any help is greatly appreciated.

 

[Don Rogers]

I don't have any 37 photos, but I do know that the 36 used straps as shown in the enclosed photo.

Hope this helps.

 

[v8fordman]

Thanks Don, that makes sense since the rear edge of the '37 would be hanging just like this pictured '36 if the straps were not there. That's an easy solution.

 

[Anton Voycheck]

Thanks Don, that makes sense since the rear edge of the '37 would be hanging just like this pictured '36 if the straps were not there. That's an easy solution.

No straps on 1937 radiator pan. Four fasteners.

 

[v8fordman]

I have the four holes on the front, but it has to have something supporting it at the rear. There are two holes that don’t reach or match anything so the strap/bracket makes sense.

 

[TonyM]

Front two fasteners attach to the lower grill.

Rear two fasteners attach to a part of the frame.

See photos.

 

[Ray Balukas]

My 37 Panel attaches like Don's Picture. 4 nuts and bolts on the front 2 straps on the rear.

 

[TonyM]

My 37 Panel attaches like Don's Picture. 4 nuts and bolts on the front 2 straps on the rear.

I see now that the OP was asking about a pick up.


Sorry about that. My error.


I should learn to read better.


TonyM