1936 Ignition Problem>>FIXED with your help

[Bruce/CT]

Thanks to all you Barners who helped with answers.
I figured I had switched a pair of wire under the dash. It's a ****** place to work. BUT NO...I switched the RED and YELLOW wires at the Coil and Cut-out. I wondered why it was so hard to thread that thick Yellow wire down the tube (much cursing) and now I know why. Alas the Ignition Switch does what it was designed to do....turn the car on and off.
THANKS AGAIN,
Bruce/CT

 

[Brendan]

i put a fresh motor in my truck and a new harness, i pulled the wires through the tube while the motor was on the stand, it looked like a ***** to do after the motor was installed!

 

[Bruce/CT]

Never had my engine out. It was no fun believe me.
Bruce/CT

 

[Steel 35]

Glad to see you found it! kind of nice when things come together & some days just take a little longer.

 

[Planojc]

Thanks for posting the fix to your problem. This may help someone else in the future.