airtex6523
Junior Member
- City
- san antonio
- State
- texas
Need front bumper mounting brackets all 4 pieces;maybe bumper also; 1936 ford sedan;do not need show pieces;please include your price;
thanks ford barn
thanks ford barn
1936 ford sedan bumper mounting bracket
- Thread starter airtex6523
- Start date
Tom Morookian
Well-known member
Just to be sure you get what you want - here's a thread I posted a few days ago:
I've been struggling with this issue for a couple of months and gone thru 3 sets of brackets... none of which is/was correct.
If I understand it now??? the outer bracket, with a 90 degree bend brings the bumper to about 1 1/2 inch from the fender.
35 bumpers have about a 45 degree angle on the bent over end. 36's have a 60 degree angle. That means the 36 brackets should have a slight bend downward about 2/3 of the way out towards the end because the mounting hole is about 3/4 inch lower. I have 1 of these for my 36.
The 35 brackets do not have the bend. I have 2ea 35 outers that I can't use.
I have another set I bought on epay that should come this week. Hopefully they will be 36 with the downward bend. If they are correct, I'll have one extra with the bend.
Now - what I got on epay was a good set of 36 inner and outer brackets.
Cost me a hundred bucks but...I Finally got what I needed.
What I have left over: 2 outer brackets for a 35 bumper ($30)
1 passenger side 36 outer bracket ($20)
1 driver side 36 outer that was cut ($5)
and welded from a passenger side
converted to a driver side
All plus shipping
I've been struggling with this issue for a couple of months and gone thru 3 sets of brackets... none of which is/was correct.
If I understand it now??? the outer bracket, with a 90 degree bend brings the bumper to about 1 1/2 inch from the fender.
35 bumpers have about a 45 degree angle on the bent over end. 36's have a 60 degree angle. That means the 36 brackets should have a slight bend downward about 2/3 of the way out towards the end because the mounting hole is about 3/4 inch lower. I have 1 of these for my 36.
The 35 brackets do not have the bend. I have 2ea 35 outers that I can't use.
I have another set I bought on epay that should come this week. Hopefully they will be 36 with the downward bend. If they are correct, I'll have one extra with the bend.
Now - what I got on epay was a good set of 36 inner and outer brackets.
Cost me a hundred bucks but...I Finally got what I needed.
What I have left over: 2 outer brackets for a 35 bumper ($30)
1 passenger side 36 outer bracket ($20)
1 driver side 36 outer that was cut ($5)
and welded from a passenger side
converted to a driver side
All plus shipping