Oldcarguy2
New member
How and where do the wood mounting blocks go when installing the bed?
1936 ford pickup
- Thread starter Oldcarguy2
- Start date
Zeke3
Well-known member
Lawson Cox
Well-known member
Only mounting blocks for the bed go at the rear corners of the bed. The smaller end of the mounting blocks face upward. The bed mounting blocks are sort of notched on the bottom or larger end where they will match the difference in height of the frame rail and rear face bar. The blocks are notched at the top to match the underside of the bed. The wide side of the block faces the side of the frame. The long bed bolt goes through the bed floor on through the center of the block and through the frame. A small piece of thin woven webbing goes between the bed and the blkock and another between the frame and the block. I Hope this helps.