1935 Roadster header bow

SUHRsc

SUHRsc

Well-known member
Can anyone post photos of the inside of the header bow on a 35 roadster? The position of the metal brackets and also the amount of gap between the wood and the windshield frame. Mine appears to have been modified leaving a pretty big gap. What would normally seal off that gap if it is correct? I am replacing the material so now is the time to correct it if necessary.
Thanks
Zach
 
Zach, Here are some photos that may help. They show the position of the header bow brackets and the sealing windlace. This windlace is held in place by a narrow piece of metal shown in the enclosed drawing.
 

Attachments

  • roof1.jpg
    roof1.jpg
    38.5 KB · Views: 51
  • roof2.jpg
    roof2.jpg
    54.5 KB · Views: 47
  • roof3.jpg
    roof3.jpg
    39.1 KB · Views: 47
  • roof4.jpg
    roof4.jpg
    77.7 KB · Views: 54
Thank you (both) very much!! that answers my questions. My car had a piece of foam glued in there and it was falling out... once I got the material and strapping off it appears like things had been messed with when the top was put on I believe in the 60's. it may not be as far off as I thought though.

thanks!
Zach
 
You must log in or register to reply here.
Back
Top