1935 rear hub/drum question

34fordy

34fordy

Well-known member
I had a pair of 35 rear hub/drums that the axle tapers were bad. I removed the hubs. I have been unable to use the Greenbook to determine if there are any other year's hubs that would be identical and attachable to the good drums.
 
.

Yup, unfortunately '35 is a "one-year-only"!

Now, you could run a '40-'41 drum and hub, and if you're still running the '35 spoke wheels, use the rings that are available to properly support the hubs of the spoke wheels.

Or, you could even run a pair of the Boling Brothers '40-'41 hub/drum assemblies along with the same spoke wheel support rings if you have the spoke wheels.

Coop

.
 
V8COOPMAN said:
.

Yup, unfortunately '35 is a "one-year-only"!

Now, you could run a '40-'41 drum and hub, and if you're still running the '35 spoke wheels, use the rings that are available to properly support the hubs of the spoke wheels.

Or, you could even run a pair of the Boling Brothers '40-'41 hub/drum assemblies along with the same spoke wheel support rings if you have the spoke wheels.

Coop

.
Click to expand...

Thanx Coop. I just thought possibly the hub portion of the assembly might have been used on something other than 35. I have two nice drums so possibly I can find a set of worn hub/drum assemblies that the hubs are good. I am sure there are some out there. Bolling Bros. would be great but more $ than I care to spend at this time. Don
 
When I look at pictures of the 33/34 rear hub/drum assemblies it appears to me that the hub portion may be the same. Not sure if the 33/34 hub uses the same 3-3/16 bearing. Thoughts?
 
You must log in or register to reply here.
Back
Top