1935 glove box door lock

They are sometimes hard find. I bought a very nice one on eBay a few years ago but also had to buy the glove box door that it was attached to.
 
JOHN, Hope I am not looking for a needle in a haystack. Would a 36 work? I would even consider fabbing one. Thank you John.........tony in prescott,az
 
heres what they look like
 

Attachments

  • DSC00187.JPG
    DSC00187.JPG
    58.1 KB · Views: 16
  • DSC00204.JPG
    DSC00204.JPG
    58.2 KB · Views: 14
tony lucckino said:
John if I had your email I'd send you pics of mine....tony
Click to expand...

Tony, you can access my email address by clicking my Avatar picture or name. Click on my contact info and a box will drop that you click to get my email address. I would like to see the one you have and i can send you picture of the one i bought on eBay.
 
I believe the difference is in 35 the plating is brushed chrome finish and 36 bright chrome finish.I have had both styles in NOS .
 
Last edited:
Tony, here's an update. According to the EFV8C/A, 1935-36 Ford Book, the picture post by Route66 shows the glove box door lock configuration for both '35 & '36. The difference would be in the finish. '35 would have a satin finish while '36 would have a bright chrome finish. IMO, the bottom line would be if you are building a high point show car, then you should use the lock with a correct finish for your year car. If you are building a driver, not to be point judged, you could use a lock with either finish.
 
I have this one but not sure if it is '35, and no idea about value.
 

Attachments

  • 36 lock 006.jpg
    36 lock 006.jpg
    36.1 KB · Views: 23
You must log in or register to reply here.
Back
Top