1935 Door Lock Parts Help

[bbrust]

After 10 years, I'm finally putting my 35 Fordor back together. Today I installed the window mechanisms and door latches. In the bottom of my parts box were 2 thin rods and 2 brackets with springs. Picture below. I can't remember where these go or what they're for. I suspect that they work with the door lock.

Also, is there a reference book I can use for the installation of the window rubber/felt? Most of it is straight forward but I'd prefer something with pictures to make sure. I do have the Early Ford V8 35-36 Restorers Guide.

Thanks, Bob

 

[Gary Tosel]

I believe those rods are for the front seat adjuster with springs on the ends.

 

[ssrcobra]

wow those are, I could use a set of them. I can't find mine

 

[TerryOH]

The rods come off of the seat adjuster handle and the brackets are the locking device for the adjusters.

 

[bbrust]

Thanks for the replies. I wonder why I put them with the door parts? I guess I had a plan 10 years ago.

Update: I checked my seat and the adjusting rods are in place and are a little different than the rods in my picture. Any other ideas?

 

[Chris Nelson]

bbrust;
Yes, to your last question. Contact ssrcobra as he seems to need them.