Guys I can not seem to find a source for the 1935 backing plate bolts that are needed to finish the final reassembly of my rear axle.These bolts are longer than the later bolts.Would like to get this right.Not seeing then listed by the usual suppliers or even Bob Nacewicz. Any suggestions?
1935 backing plate bolts
- Thread starter B-nut
- Start date
1937pickup
Well-known member
Give Little Deerborn in Mpls a call-they may be able to help.
JM 35 Sedan
Well-known member
I have a coffee can of good used '35-'36 nuts and bolts used to fasten backing plates to spindles and rear axel housings. I removed these from rears that I have dismantled over the years. Send me a pm if you would want some of these.
oldandtired
Well-known member
B-nut...I have some used ones out in the parts bin, but there are 3 different length ones and I cannot remember which ones fit what year. The 3 length ones I have seem to be 1 inch 1 1/4 inch and 1 3/8 inches long.
O&T
O&T