1934 Rear spreader Bars

N

Nicki40

New member
does anyone know the difference between a 1934 Ford Victoria spreader bar and a 1934 regular spreader bar? Thank YOu
 
Not sure, but it MAY also have the rear body support brackets as used on PU,
Panel Delivery, Sedan Delivery and Wagon, since the Victoria body also extends further to the rear than do "normal" passenger bodies.
 
This answer ok? 34 Vicky spreader
 

Attachments

  • 34 vic spdr.jpg
    34 vic spdr.jpg
    87.5 KB · Views: 211
DICK SPADARO said:
This answer ok? 34 Vicky spreader
Click to expand...

Best you can come up with??? Don't have a NOS??? :)

As I suspected EXCEPT the rear body supports are not the same as
others I mentioned; and look to end up lower down and a little further forward, which is not surprising... This is unique to the 34 Victoria; 33 probably different...

R.
 
Thanks to all that replied, they were all very helpful. Thanks for the picture, it turns out that the one I have is for a Victoria. Again I appreciate all the responses.
 
Dick
I dont suppose that you still have the 34 vicky spreader bar shown in your pic and would consider selling it and/or a 34 vicky rear tire carrier ------------ had to ask --------- thanks
 
You could probably make one just weld the pickup mounts onto a sedan bar
 

Attachments

  • image.jpeg
    image.jpeg
    113.2 KB · Views: 76
Ditto on missing Dick. I used to talk to him at Hershey.
I fixed a more screwed up 34 sedan delivery then the one pictured and I took a pickup bar and welded a mount on it to match the body like suggested. You could also take a common one and cut the spare mount off and then weld on the body mount. Get the body on the frame and make that last body mount on the spreader match the body.
 
You must log in or register to reply here.
Back
Top