1934 phaeton wiper hose routing

T

tjb

Junior Member
Can any one provide me with a picture of the routing of the wiper hose from the wiper motor to the down tube on the windshield post. I must have an aftermarket windshield frame because I am trying to mount the 2 clips that hold the rubber tubing to the top and there should be holes already drilled but they are not. Or can someone provide me with the proper measurements from the edge of the frame to the clips Thanks
 
Any chance this is covered in the Restoration Guidelines from the Early Ford V8 Club (earlyfordv8.org)? I have a '32 roadster and know what you are talking about.

Charlie Stephens
 
tjb ...........................
I am able to provide a photo of the hose, from the wiper, to the down tube. There is only one clip and the screw-hole is exactly 4" from the outside edge of the frame.
Hope this answers your questions.
MIKE :)
CLICK ON PHOTO TO ENLARGE - Twice
 

Attachments

  • 34wiperhose.jpg
    34wiperhose.jpg
    311.3 KB · Views: 52
Last edited:
Thanks Mike I was told there were 2 clips but maybe they were refering to a 1933 car
as David in the post after yours refers to. Your car I presume is a 1934 Thanks tjb.
 
tjb .............................
Yes, this is a 1934 Phaeton. It's all original and unrestored. This is the same car as my avitar.
I was not aware that the '33s had two clips. My frame, only has the one hole.
MIKE :)
 
You must log in or register to reply here.
Back
Top