1934 Ford Radio bracket id

[34hardhead]

I have several of these brackets, and cannot figure out how they fit the
Radio, I think they go behind the radio to the firewall, but do not know for sure, also are they for an ash tray radio or glove box radio,
View attachment 162701

View attachment 162702

View attachment 162703

 

[deuce lover]

Your attachments did not come thru for me

 

[Lawson Cox]

Nor me.

 

[34hardhead]

Can you see these

 

[34ford]

that is the rear bracket for the glove box radio

 

[fordbug79]

Would you be willing to sell one of the brackets as I am in need of one.

Thanks

 

[Randy]

Since no one has mentioned how it fits and that seemed to be part of the original question, here goes: the shouldered stud and the pointed end go to the firewall with the pointed end up, the shouldered stud going through the hole in the firewall (which has to be punched out if the car never had a glove box radio before) with a nut on the outside and the point digging into the firewall insulator (possibly designed to pierce the paint to create a ground, not sure?). The shoulder is there to allow tightening of the bolt without crushing the firewall insulator. The other stud goes through the hole in the bracket on the back of the radio with a nut to support the back of the radio.

 

[Pete/Ct.]

If you are selling them I could use one also, thanks. Pete/Ct.

 

[DavidG]

I believe you meant to write that the pointed end faces up.

 

[Randy]

I believe you meant to write that the pointed end faces up.

Yes, that's correct, sorry. I corrected it above. Thanks!