1934 Ford Headlight Stands

95476

95476

Senior Member
Are '34 Ford headlight stands interchangeable from right to left ?
Are the '35-'35 Ford truck headlight stands interchangeable with '34 passenger headlight stands ?
Thank you.
 
From my experience the pass car 33-34 headlite stands and mounting bolts are the same as 35-37 truck and pickup parts. The horn mounting brackets however are different between the two..
 
With respect, the head lamp stands for '33-'34 passenger cars are not the same as those for '35-'37 commercial vehicles and trucks. The latter are shorter in height and have different part numbers.
 
That's interesting that and I always like to know new info. I have about 12 pair and they all seem to be the same height and took many from 33-34 Ford cars. No part numbers noted. Laid on a flat surface, they have a max overall height of approx 2 & 1/2 inches. Some even came with 35up pickup horn brackets attached. I think I have seen a few similar brackets at swap meets that are a little taller but were not IDed. Any info appreciated.
 
DavidG said:
With respect, the head lamp stands for '33-'34 passenger cars are not the same as those for '35-'37 commercial vehicles and trucks. The latter are shorter in height and have different part numbers.
Click to expand...

Ditto.

The angle of the fender in relation to the headlight bolt is different as is the shape of the fender.
 
If you put the two next to each other, the difference is plain to see; both in left to right and car to later truck.
 
You must log in or register to reply here.
Back
Top