1933 pickup, webbing between cab mount and frame?

Flowmeister

Flowmeister

Senior Member
Getting ready to set my 1933 cab on the frame, my question is,
should there be a piece of webbing between the wood block
cab mounts and the frame?

Thanks for any input and information.
 
I don't know about your 33, but my 41 had a thin rubber belting between the original wood and the frame. I suspect you should have webbing between the wood and the frame.
 
Just a note; the rear of the cab should not touch the frame. Some wood blocks are copied from old wood that was shrunk. Newc
 
You must log in or register to reply here.
Back
Top