1933 Lower Water Inlets

D

Deuce399

Junior Member
Hi Guys

I'm started to disassemble my 1933 Flathead for a light overhaul.
When disconnecting the lower radiator hoses I can see that the two
water inlets (where the hoses connect) to the block is in a quite bad shape.
I have now spend some hours looking for a replacement set but
it seems hard for me to find a dealer who have them.

Maybe it's just me looking for some thing wrong or can it be true that
such lower water inlets is not being reproduced?

/Jan
 
I don't know if they are being reproduced but should not be that difficult to find some good originals. I recall seeing a couple pairs at Hershey. Somehow I wound up with one side in my stash. PM me if interested in that one.
You could also repair your originals by building up those hose connection areas with weld until they are long enough to properly clamp the hoses.
 
Last edited:
maybe Charlie NY will post ??? I believe he has a fix he does on these?
In any event, I also have a pair - not perfect, but usable. You can PM me.
It will be about a week until I can get to them and provide a picture.
As far as I'm aware, they are not being reproduced.
Also, usually the Early Ford Store, San Dimas, CA has them.
 
You must log in or register to reply here.
Back
Top