1933-35 Original heads needed

35fordtn

Well-known member
City
Nashville
State
TN
I am in a severe need of 1933-early 35 Ford original aluminum heads. Must have Ford script and 40- prefix part#. NEED NOS or near mint condition please call michael @ 615-293-9985 or email @ driskellracing@gmail.com
 
You can buy reproduction aluminum heads that are exactly like originals. Not cheap though. The last time I checked they were $1500 per set but very very nice.
 
The Ford script was not on the heads proir to about Aug. 1934 so most of the 33-34 heads do not have script.
 
I've got a drivers side head but have yet to find a p/n just the Ford script:

PM for price and details.

Jeff
 

Attachments

  • DSCF3949.jpg
    DSCF3949.jpg
    52 KB · Views: 17
  • DSCF3950.jpg
    DSCF3950.jpg
    56.6 KB · Views: 12
  • DSCF3951.jpg
    DSCF3951.jpg
    33.8 KB · Views: 12
  • DSCF3952.jpg
    DSCF3952.jpg
    27.3 KB · Views: 12
  • DSCF3953.jpg
    DSCF3953.jpg
    23.3 KB · Views: 11
  • DSCF3954.jpg
    DSCF3954.jpg
    25.2 KB · Views: 11
  • DSCF3955.jpg
    DSCF3955.jpg
    52.2 KB · Views: 13
  • DSCF3956.jpg
    DSCF3956.jpg
    46.7 KB · Views: 12
:DThere's quite a few variants of 33-34 heads and like Terry stated above MOST of the gennie ones don't have ford on them . Some have no markings other than the usual stamped stuff top front . The later ones also have smaller spark plug openings . There was a thread about the HT markings on later ones and Don Rodgers had the Good info on that and also touched on the different suppliers of them . He may have further info on these heads .I personally just buy the ones with recessed part # and no Ford script and the un-marked ones - both these types have the proper large plug opening and the first type shows up consistently on gennie 33 motors . The LH posted above looks like a gennie late 34 to me . Hope this helps as these can get expensive if nice and a guy hates to buy the wrong ones . :D David J
 
I have one (1) single alumium head that looks to be NOS. Still has the metal plugs inserted where the spark plugs go. Has a part # 52-6050-B and a "FORD" script along with the #HT8. A #2 with-in a circle and the #3 just below. I think this might be for the 1937-41, 60 HP but I'm not sure. I will sell for $100. plus freight. Gary Clonts, Oklahoma City, OK 73142 405-620-2655 ggcinvest@aol.com
 
The heads i need are for a EARLY 1935 Ford that used late 34 heads They need to be Ford script with large plug opening and a 40- part#
 
I am in need also, I came across a pair on ebay last night, they look great guy claims that they are NOS. If I recall it had a buy it now for a grand. To much for my pockets right now but you might want to check.
 
Back
Top