the.secret.victoria
Junior Member
Can anyone provide some photos and dimensions/sketches of the following two pieces for the forward floor board on the '33-34 passenger cars?
If someone could provide a paper pattern of these, that'd be phenomenal since it doesn't appear reproductions are available commercially. Alternatively, even though this isn't the correct forum for the request, I'd be interested in purchasing these panels if anyone has them available. Either would allow me to more accurately fabricate mirror-imaged pieces for my RHD setup.
- Metal plate that gets nailed to the exterior side of the wooden floorboard above the notch / below the pedals. In the manual this is the piece next to the (A) in photo on page 7-40.
- Metal panel welded to cowl above steering column / pedals. Somewhat shown on manual page 7-41.
If someone could provide a paper pattern of these, that'd be phenomenal since it doesn't appear reproductions are available commercially. Alternatively, even though this isn't the correct forum for the request, I'd be interested in purchasing these panels if anyone has them available. Either would allow me to more accurately fabricate mirror-imaged pieces for my RHD setup.
Last edited: