1932 Part?

[v8fordman]

Would anyone happen to know what year model this transmission mount? It is marked early 1932 but I’ve never seen one like it. Any help identifying it would be greatly appreciated.

 

[John R]

Definitely not 32

 

[petehoovie]

Would anyone happen to know what year model this transmission mount? It is marked early 1932 but I’ve never seen one like it. Any help identifying it would be greatly appreciated.

 

[38 coupe]

Sure looks like a 33-34 rear bearing retainer to me.
There is lots of great transmission information including identification pictures over on Van Pelt's very helpful website.

 

[Tim Ayers]

Like '38 Coupe said, pretty certain it's '33/'34.

 

[32phil]

looks like 33-34
If you take it apart the casting with the bolts sticking out works for 32-36
Also the flat plate with the half holes that mates with the above casting is also 32-36.
All you need is a repro 32 trans mount and you can use it in a 32

 

[Bored&Stroked]

What is strange about it is that it appears to be solid in the ears? The 33/34 mounts that I've seen were made from stamped/formed steel - not solid as shown. Also, they did not have that big round plate (like a 32 does).

From ThirdGen's site:



I'm thinking more along the line of a big truck (non passenger car frame)??? This is just a guess!

 

[Tim Ayers]

The plate is the bearing retainer, no? Used on 32-36 transmissions?

 

[35fordtn]

Argentina 60’s repop of the 40-5089 33/34 mount

 

[TerryOH]

The cast iron insert usually have part number cast into the metal. Have to clean to find it.

 

[Kube]

Argentina 60’s repop of the 40-5089 33/34 mount

In other words... garbage.