1932 Model B Ford correct generator picture.

[37 Coupe]

Would someone have a correct 1932 Model B generator that they could post picture of the back and front showing pulley. I know what it should look like with terminal post to the rear unlike Model A generator but I just am having trouble i.d. ones for sale.I think mine is a Model A or a replacement as it looks nothing of what I can tell from 1932 book.

 

[ndnchf]

The 1932 model B generator is almost identical to the 1931 model A generator EXCEPT it uses a 3-1/4" diameter cast pulley, rather than the 3-5/8" diameter cast pulley of the model A, and a 1.5" wide band. Not an easy pulley to find. It will look just about like this except with the smaller pulley and copper plated nuts on the terminal post.
Steve

 

[petehoovie]

The 1932 model B generator is almost identical to the 1931 model A generator EXCEPT it uses a 3-1/4" diameter cast pulley, rather than the 3-5/8" diameter cast pulley of the model A, and a 1.5" wide band. Not an easy pulley to find. It will look just about like this except with the smaller pulley and copper plated nuts on the terminal post.
Steve

 

[oldford]

What 32 book are you referring too.

 

[ndnchf]

What 32 book are you referring too.

"The 1932 Ford Book" put out by the early Ford V8 club. Chapter 6, the electrical section discusses both the model B and V8 generators.

Steve

 

[deuce lover]

What 32 book are you referring too.

These were the hard bound . Spiral bound available on the V8 Ford Club Website.