1932 Ford Roadster wiring

C

Carsten

Member
Hello, I am going to install a new wiring harness and are looking for blue prints that shows how the "path" is on the chassie and what clips to use. The same for the engine compartment. Thank you
 
Carsten, if you are looking for originality, I would purchase the two book set on 1932 Fords offered by the V-8 Club of America. It was written by Dave Rehor the '32 authority. It covers everything needed to restore a '32 Ford correctly.
 
The good news is there is very little wiring on a 32 roadster! Assuming you have a good quality set of harnesses from the real wiring guys, you must have Dave Rehor's set of 32 books. From there you will have to study all of the photos and read the entire two books. Otherwise you will be left with only a couple of illustrations from the owners manual and the service bulletins.
My opinion
 
Appendix 13 of the referenced book shows each of the various clips used in conjunction with the various '32 wiring harnesses and their location. Appendix 15 shows phantom views of the routing of the various harnesses, early, late, four, V8, LHD, and RHD.
 
You must log in or register to reply here.
Back
Top