1932 Ford rear crossmember rivets

3

392 Hemi

Member
Hi. I'm wondering what size rivets were used on the 32 Ford rear crossmember and who sells them. Any help on this is appreciated.

Thanks!
 
Precision Coachworks in Billerica, MA used to be the "go to" for this sort of thing. Unfortunately, they have been out of business for quite a while. I have heard the Joe's Auto Parts has taken over part of that business. You may want to check with them.

You could also use Allen socket head capscrews as I suggested in the other thread.
 
Logo-Blue.svg


https://rapidrivet.com/industrial-rivet-fastener-applications

Rapid Rivet & Fastener Corp.

Call Toll Free : 800 - ( 727 - 4378 )

Minimum Order Requirements:

Rapid Rivet has a $35.00 minimum order requirement per purchase order for domestic (U.S.A.) shipments, and an $10.00 individual line minimum.


Rapid Rivet delivers industrial rivets and fasteners for a wide range of sectors:
www.jalopyjournal.net-Aerospace: NAS and MS spec rivets for aircraft skin, interior, and structural assemblies
-Defense: High-performance fasteners for vehicles, weapon systems, and electronics
-Automotive: Body panels, structural frames, and trim with corrosion-resistant fasteners
-Electronics: Miniature rivets for enclosures, terminals, and PCBs
-HVAC & Rail: Vibration-resistant rivets for ducts, railcars, and infrastructure
-Marine & Infrastructure: Corrosion-resistant solutions for shipbuilding and bridge components
Our inventory depth and fast shipping make us the preferred partner for time-sensitive and large-scale projects.
 
Last edited:
Heat them up red hot and drive them with a proper rivet set and 5X gun or larger. You can use a hammer but it takes longer and the hammer work has to be precise. It takes two people to do this type of work. The largest bucking bar you can find or make is advised.
 
You must log in or register to reply here.
Back
Top