1932 Ford clutch lever

B

Bully

Junior Member
City
Portsmouth
State
England
Hi all.
I am new here,having been recomended by users of the Hot Rod Meltdown forum in the UK.
I am lucky enough to be the owner of an original 32 Ford frame,which i am putting together with its original axles etc.But,the gearbox i have acquired is a later 34 version,which means the clutch lever is wrong.
Anyone have an original 32 dogleg style lever they would be prepared to sell and post to the UK.If so,please drop me a line.PM or my email, jackie.bull@btinternet.com
Thanks,and looking forward to getting to know you all.
Mark
 
Mark, I do not have one but am familiar with them. I would believe left and right would innerchange. The ones I've seen lately because of the 32 scarcity are about $200. They are being repoed. Theyre a little cobby so need to be cleaned up. I'm not sure how much they are, but it's worth looking into. Elmer Swift
 
Thanks guys...and its left hand drive by the way!
I have contacted`hotrodjohn`who i was advised fabricates them.I am awaiting news on the cost inc shipping so hopefully that will be friutful.
Thanks for your help.
Mark
 
An arm would be easy to make if you have any arm now. I posted pics and drawing of one a while back. Weld a piece of bar on the base you have and weld the cut off part to the top of the new part. Grind to look like a 32 arm!
 

Attachments

  • P1040350.jpg
    P1040350.jpg
    17.8 KB · Views: 45
  • P1040347.jpg
    P1040347.jpg
    64.5 KB · Views: 38
Last edited:
Andy said:
An arm would be easy to make if you have any arm now. I posted pics and drawing of one a while back. Weld a piece of bar on the base you have and weld the cut off part to the top of the new part. Grind to look like a 32 arm!
Click to expand...

Thanks Andy....some times i cant see the wood for the trees!
Is that the fabricated one you made in the right hand picture?If so.it looks really good.One question..is the dimension of the length,centre to centre in the left hand pic 4.5"?My eyes aint what they should be!
Mark
 
pauln said:
i have one 100.oo+ shipping 603 332 6266
Click to expand...


Thanks Paul..i am going to have a think about what Andys done over the weekend.If i decide to go with the real deal i`ll drop you a line.I dont suppose you have any idea of postage cost?I am in no rush so snail mail would be fine.
Mark
 
Hi guys,thought you might like to see a picture of how it was when i picked it up:eek:.Here it is going on to the trailer....what have i let myself in for?:(
Mark
 

Attachments

  • 32 Project Body.jpg
    32 Project Body.jpg
    75 KB · Views: 32
Bully said:
Thanks Andy....some times i cant see the wood for the trees!
Is that the fabricated one you made in the right hand picture?If so.it looks really good.One question..is the dimension of the length,centre to centre in the left hand pic 4.5"?My eyes aint what they should be!
Mark
Click to expand...

The arm in the pic is a ginnie. I have since acquired one for my project so other views, dimensions are now possible.
The 4.5 dimension is center to center.
 
You must log in or register to reply here.
Back
Top