1932 and 1933-34 Cab Mounting Wood

[itslow]

I see that the various vendors lump these three years together when it comes to the cab mounting wood. Are these pieces indeed usable between the years? Are the heights and contours the same? I do know that the length and hole locations of the forward pieces are not the same between the years, but are the height and frame-side contour the same?

Which vendors sell the correct '32 parts? I've found the set I have is obviously for a '33/34 (given the length and holes of the front 2-pieces) and leaves the body sitting on the frame instead of the wood.

 

[Krylon32]

I bought 32 cab specific wood from Macks Reproductions in Missouri and all the holes lined up and when I got done so did the hood.

 

[Roy Nacewicz]

I see that the various vendors lump these three years together when it comes to the cab mounting wood. Are these pieces indeed usable between the years? Are the heights and contours the same? I do know that the length and hole locations of the forward pieces are not the same between the years, but are the height and frame-side contour the same?

Which vendors sell the correct '32 parts? I've found the set I have is obviously for a '33/34 (given the length and holes of the front 2-pieces) and leaves the body sitting on the frame instead of the wood.

Mike, email me at nertman@aol.com and I'll give you the "skinny" on all this
Roy Nacewicz

 

[itslow]

Roy, you need to add these blocks to your product line!

 

[Newc]

Cauton all; The old original wood is usually shrunk and copies frequenty let your body contact the frame. Newc

 

[32dude]

1932 truck wood is different than 33-34

Bruce