1930 Model A Head Puller

T

Tveditr

Member
Was wondering if anyone has a head puller they no longer need and would be willing to sell, Loan, rent??? I’m in Indianapolis area and would be happy to pay up. Text me at 317 809 4291. Ask for Eric
 
If your having a problem removing the head on a Model A, try loosing all the head nuts. Leave spark plugs in. Leave ignition off. Hit starter. Head should pop up. Enjoy.
 
Some times the head is stuck fast to the block,you can practically raise the entire front of the car or truck and the head won't budge,been there.
 
The last engine I pulled out of a car, The head was so seized I was able to get get it out with a chain and spark plug eyes. There were no head nuts on any studs! And that's after liberally dousing them with WD 40. They had every reason to let go, but didn't. I put the nuts back on and hit them from the sides and blew out the holes around the studs and soaked them in WD 40 over night. and hit the head with a lead hammer. Eventually, it started to move to where I could get a knife blade in between the head and the block. It fought me all the way!
Terry
 
all else fails weld head nuts to studs and impact wrench them out..corrosion x is what I use.

Kx9xgIN.jpg
 
You must log in or register to reply here.
Back
Top