THE "A" FAMILY
Senior Member
- City
- EUGENE
- State
- OREGON
- Price
- $17,000
* * * LOWER PRICE * * *
Excellent driver. We rebuilt the entire drive train for the 2010 Pony Express. With the direction and help from a life long professional with over 50 years experience under the Model A hood. Everything from the brakes, rear end, transmission, to the radiator and leak less water pump. We also put in a new updated engine with a high compression head. All 12volt, including the starter. FSI Electronic ignition. Weber carburetor. Mitchell overdrive. Bright Halogen lights. Great Mohair interior. Beautiful hand engraved Wind Wings. This is our regular driver. We drive this every week. I feel very comfortable driving this on long trips with no issues. Pics available. you could drive it home if you wanted. send me an email and I will get back to you.
Thank you
Nick
nkspcc@gmail.com
541-870-7767
**** NOVEMBER 25 UPDATE ****
I did a compression test on the engine today. I tested each cylinder at least 5 times. I got 90 psi to 93 psi in all 4 cylinders. Here is a pic.
**** NOVEMBER 29 UPDATE ****
A friend brought over a compression tester that screws into the hole. Instead of trying to hold in place(the way I did it). His tester is more accurate. We constantly got reading of 100 to 105 in every cylinder. Here is a new picture.
Excellent driver. We rebuilt the entire drive train for the 2010 Pony Express. With the direction and help from a life long professional with over 50 years experience under the Model A hood. Everything from the brakes, rear end, transmission, to the radiator and leak less water pump. We also put in a new updated engine with a high compression head. All 12volt, including the starter. FSI Electronic ignition. Weber carburetor. Mitchell overdrive. Bright Halogen lights. Great Mohair interior. Beautiful hand engraved Wind Wings. This is our regular driver. We drive this every week. I feel very comfortable driving this on long trips with no issues. Pics available. you could drive it home if you wanted. send me an email and I will get back to you.
Thank you
Nick
nkspcc@gmail.com
541-870-7767
**** NOVEMBER 25 UPDATE ****
I did a compression test on the engine today. I tested each cylinder at least 5 times. I got 90 psi to 93 psi in all 4 cylinders. Here is a pic.
**** NOVEMBER 29 UPDATE ****
A friend brought over a compression tester that screws into the hole. Instead of trying to hold in place(the way I did it). His tester is more accurate. We constantly got reading of 100 to 105 in every cylinder. Here is a new picture.
Attachments
Last edited: