the back rest and seat cushion are the only upholstered items. the kick panels were vinyl covered cardboard. there was no headliner or door coverings. the floor mat was a pattern stamped rubber mat. no carpet.
Are you sure? That really does not align with what is on my prints. The doors, kick panels, and remaining trim panels (quarters, qtr. lock pillars, header, etc.) were all cardboard. Nothing vinyl to my knowledge.
I am looking at getting judged in the restorers class this year and would like some assistance. I cannot find anywhere a picture of link as to what the interior looked like for my '29 pickup. What pedals, carpet or rubber mat, mirrors, cloth, etc.. Does anyone have a link they can direct me to?
The RG&JS book is basically a copyrighted compilation of the information found on the engineer's drawings that are located up at the Benson Ford Research Library. If there is a link to these anywhere, then it is likely an illegal posting of information. I can give you part numbers for many of the individual pieces, however to be authentic, you will need to manufacture much of the interior for that bodystyle as the materials available commercially are incorrect.
Regarding your questions about pedals, rubber mat, mirrors and cloth,
-...the pedals had a couple of versions that you will likely need to refer to the RG&JS book,
-the rubber floor mat used in the 82A was the same as open cars however the commercially available floor mats will need to be altered and canvas added to be correct,
-the only mirror available on the 82A was an exterior mirror (-nothing mounted on the interior),
-and the only cloth used was the foundation and the tail on the seat cushions, and the underside of the roof lining. No other cloth used.
.