1928 starter switch need help

jm29henry

jm29henry

Well-known member
please help I probably should post this put the swap meet but would feel better doing it here . I bought a 1928 starter switch I was so thrilled to get one that I did not think to check if all was there I have the switch but I am missing strait starter rod with the hole ,the short sleeve and spring please help if you can.thanks in advance(posting this pic I found in the archive to show what I am missing)
 

Attachments

  • f93dfb7e.jpg
    f93dfb7e.jpg
    67.4 KB · Views: 38
Last edited:
The rod is a separate part, & the cover & spring are also twice as hard to find than the switch..
 
I found a spring at the Sears Hardware Store that fits when I was north of Chicago visiting Mark Maron. I'm also still looking for the sleeve and could use 2 or 3 to complete some switches. Bert's might have the push rod.

BTW, that is my picture in the first post, so I do have one complete switch for my 28, but would like to make a couple others complete.
 
(11473-b)is the spring ford part #/and (11474-b)is the sleeve ford part # ,still looking for the starter rod that goes threw the floor as well as the two parts listed above thanks so much for your help !!!
 
You must log in or register to reply here.
Back
Top