1928 phaeton top iron dimensions
- Thread starter Bird2
- Start date
glenn in camino
Well-known member
They are probably Model T
Classiccanuck
Senior Member
what dimension do you want? I have a set off the car.
Synchro909
Well-known member
Our cars were usually made in Canada and we have found by painful experience that the American bows do not fit. I'm not sure the dimensions you are able to give will be of any use.
FWIW, The OP may be better off waiting till he can get dimensions from an American car.
C26Pinelake
BANNED
[I have an old friend that bought a set of drawings off EBay and I am sure he would sell them to you now that he is finished with them. If you are interested in buying them I will ask him to send you a pm. Wayne[/B]
Classiccanuck
Senior Member
I'll measure the each of the bows for you, without the wood included.
Classiccanuck
Senior Member
starting from the rear, 39" 26.5" 30" 38"
glenn in camino
Well-known member
The other day, I talked to LeBarron Bonney about their flexible tack strips for roadster/phaeton top bows. Does anyone have experience with this product.
Hi Guys and thanks, it is an Australian model but i assume they would be the same as yours, by photos ive seen they look identical, i will take photos of them and post maybe that will help identify them? In the meantime does anyone have drawings etc to go off?
Hi Classicanuck are those measurements the heights (length of each bow)?
Hi Classicanuck are those measurements the heights (length of each bow)?
Attachments
Last edited:
Classiccanuck
Senior Member
I measured them from tip to tip, just the bow, total length of each bow. From your picture, they are for touring body, compared to the set I have I don't think the ones you have are for an A, there are a few differences that I can from you pic, what stands out is the curve on the rear most iron where it attaches to the body, mine has no curve.
I would assume they are from a "T"
Last edited:
Classiccanuck
Senior Member
No problem, took me a few years to find a good set, then I placed a want ad for "parts wanted" on an on-line site (Kijiji) got a call a few days in that's how I got mine. Good luck!