1928/29 radiator support rods.

E

EZJACK

Junior Member
I need dimensions for the distance apart at the firewall for the two brackets that support the rods that go forward to the radiator and also the distance down from the sheet metal edge just above them. Scaling from photos, it looks like about 10 and 1/2 inches apart, but its difficult to scale from photos, especially when they are usually from an angle. Also it looks like they are down from the edge about 1 and 1/2 inches. Thanx for any help.
Jack Fox, Lakewood, CA. (full fendered Brookville roadster)
 
Jack, I used the outer rivet holes for reference. 13 5/8" apart and 1 1/4" from the underside of the metal lip.
 
Thanks Russ, just what I needed to know. Too bad for me that you don't live in Lakewood. I appreciate your help. Jack, Lakewood, CA.
 
You must log in or register to reply here.
Back
Top